Key Features
- High-configuration match. The lamp is specified for Model X cars built with high-configuration front lighting, and its housing and mounting layout follow that build.
- Left-side fitment. Tabs and fixing points line up with the driver's side of the car, so a front-corner repair stays an unbolt-and-refit job.
- Factory-style seating. The unit sits flush against the fender and bumper once fitted, with no shimming needed — the extra work that generic aftermarket headlights often demand from a technician.
- Original connector. The lamp is made to plug into the vehicle's existing lighting connector, so there is no rewiring or adapter to source before the car goes on the ramp.
Specifications
| Vehicle | Tesla Model X 2015-2021 |
| Position | Front left, driver side |
| Configuration | High configuration |
| Type | LED headlamp assembly |
| Voltage | 24 V |
| Wattage | 65 W |
| Output | 6000 lm |
| Colour temperature | 8000K natural white |
| Housing material | PP |
| Part numbers | 1034312-00-D / 1034314-00-F |
| Condition | New |
| Universal fitment | No |
| Warranty | One year |
| Packing | Carton |
Fitment & Compatibility
Fitment here is specific rather than universal. This unit belongs on the left front corner of a 2015-2021 Model X built with high-configuration lighting, and the right-hand side uses its own reference, so check the side as well as the configuration before ordering. The fastest way to confirm is the number moulded on the housing of the car headlight you are taking off: if it matches the reference in the specification, the lamp will line up with the original brackets and connector. Low-configuration cars take a different unit and are not a straight swap. Our team works with repair shops and resellers as automotive parts suppliers for this model, so if the number on the old lamp is worn or unclear, send a clear photograph and we will check it before your order is released.
Installation Steps
- Isolate the vehicle's electrical supply and let the lighting circuit settle before removing any trim.
- Take out the front wheel-arch liner fixings so you can reach the back of the lamp, and keep the fasteners in a tray.
- Remove the fixings that hold the lamp, ease the unit forward, and release the connector.
- Set the old unit aside so it can be compared with the replacement, and keep it until the job is signed off in case it needs to go back on.
- Fit the connector to the new lamp, seat it on its brackets, and tighten the fixings evenly — hand-tight first, then final torque.
- Refit the arch liner and bumper fixings, restore power, and check the lamp, indicator and side marker before the car leaves the bay.
- Have the beam height checked against the original setting once the car is back on the ground, then recheck it after the first road test.
Scale & Supply Capability
Hongyang Auto Parts supplies aftermarket body parts and upgrade accessories to repair shops, distributors and styling projects worldwide. Our catalogue covers thousands of items across car grilles, bumper covers, upgrade bodykits, headlights and lighting, hoods and fenders, and car accessories, with coverage spanning Toyota, Nissan, Infiniti, Chang An, BYD, Chery and other popular makes. Every order is quoted at factory pricing, and our QC support follows parts from sourcing through dispatch. Send us your make, model, year and required quantity, and our team will confirm availability and pricing.
